STD Tuning Engine MW rack limiter

MW rack limiter

MW rack limiter

 
  • 0 Vote(s) - 0 Average
 
Kevy
Naturally-aspirated

11
03-04-2020, 07:10 PM #2
To clarify, I put the rack limiter back in.

I set it all the way adjusted in. Adjusted the torque control 3-1/2 turns CW, turned in the coarse idle 1/2 turn CW and the horizontal stop to about 1/4" from the nut.
The throttle is very touchy off idle but tapers off quick. It returns to idle and maintains idle perfect. EGT gets past 1300 at WOT. Think I'll turn back the rack 2 CCW.
Kevy
03-04-2020, 07:10 PM #2

To clarify, I put the rack limiter back in.

I set it all the way adjusted in. Adjusted the torque control 3-1/2 turns CW, turned in the coarse idle 1/2 turn CW and the horizontal stop to about 1/4" from the nut.
The throttle is very touchy off idle but tapers off quick. It returns to idle and maintains idle perfect. EGT gets past 1300 at WOT. Think I'll turn back the rack 2 CCW.

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
MW rack limiter - by Kevy - 02-14-2020, 04:13 AM
RE: MW rack limiter - by Kevy - 03-04-2020, 07:10 PM
RE: MW rack limiter - by Kevy - 04-22-2020, 10:31 PM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)