Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Maximising Torque om606
clarknova Offline
Naturally-aspirated
*


Posts: 7
Joined: Sep 2016
Location: Alberta
#1
Maximising Torque om606
I'm going to be putting a performance mech IP onto a 606 and looking to get the most possible torque. This will be a daily driver, so I'm not interested in fitting any turbo that's going to introduce more lag than is present with the stock 606 turbo.

An obvious option is to keep the stock turbo and modify the wastegate, a la dpuk's 1.4-bar actuator. I'm interested in looking at any alternative opinions. Can anybody recommend a good turbo or even supercharger that has demonstrated value on the 606 for low-end performance?
02-12-2020, 12:59 PM
Find Reply
zeeman Offline
Holset
****


Posts: 389
Joined: Jan 2012
Location: Idaho
#2
RE: Maximising Torque om606
(02-12-2020, 12:59 PM)clarknova Wrote: I'm going to be putting a performance mech IP onto a 606 and looking to get the most possible torque. This will be a daily driver, so I'm not interested in fitting any turbo that's going to introduce more lag than is present with the stock 606 turbo.

An obvious option is to keep the stock turbo and modify the wastegate, a la dpuk's 1.4-bar actuator. I'm interested in looking at any alternative opinions. Can anybody recommend a good turbo or even supercharger that has demonstrated value on the 606 for low-end performance?

Take a look at Dieselpumpuk's hybrid turbo and his test video with a G-wagon. It works well at lower RPM.
02-13-2020, 12:56 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)