A discussion on EGT and Exhaust back pressure on an OM606
A discussion on EGT and Exhaust back pressure on an OM606
My egt's have actually gotten better. I found that a few of my silicon boots were leaking and replaced them all with 4 ply and cranked the t-bolts a little more so than before. It's helped a lot. My IC (a large ebay unit) seems to be performing pretty well. I'll try to find the spec for it and post later.
** Update- My IC is a front mount 23" x 13" x 3" with 2-1/2" ports (down facing).