A discussion on EGT and Exhaust back pressure on an OM606
A discussion on EGT and Exhaust back pressure on an OM606
02-07-2020, 05:20 PM
#30
50harleyrider
02-07-2020, 05:20 PM #30Jav1 Why do you run 90% fueling? so you set the max fueling at 225? Too much fuel causes high egt's. I guess Baldur set up the DSL1 with the fuel limit table maxed out at 200 assuming the 250 value = 100% of the fuel the 6mm elements can deliver. At least that's what the rack parameter fuel quantity breakpoints table indicates. I did try a wide open run and emap barely ever exceeds boost so I'm well within the 1.5 factor. Baldur said this about fuel quantity and I quote: "This table is in units of fuel quantity and 200 is double that of 100. However this table only has an effect to restrict, it's the fuel request table that works to request a fuel quantity and this table will restrict the maximum fuel quantity possible based on boost pressure. So if the fuel request table has numbers below 100 then a change in the limit table from 100 to 200 has no effect whatsoever."
Messages In This Thread
A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-27-2020, 06:56 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-28-2020, 10:49 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-28-2020, 02:58 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-28-2020, 07:37 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by zeeman - 01-30-2020, 03:05 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by Petar - 01-29-2020, 05:34 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-29-2020, 08:15 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-29-2020, 05:35 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-29-2020, 05:49 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-30-2020, 08:24 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-30-2020, 11:20 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by Petar - 01-30-2020, 11:21 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-30-2020, 11:22 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-30-2020, 11:43 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-30-2020, 08:17 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-30-2020, 10:24 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 01-31-2020, 10:37 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by zeeman - 01-31-2020, 11:19 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 01-31-2020, 01:06 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-05-2020, 03:56 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 02-06-2020, 10:29 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-06-2020, 11:38 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by Petar - 02-06-2020, 02:09 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 02-06-2020, 02:26 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-06-2020, 05:01 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by Petar - 02-07-2020, 09:34 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-07-2020, 11:34 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 02-07-2020, 02:54 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by TwoMuchBoost - 02-07-2020, 04:44 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-07-2020, 05:20 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-07-2020, 05:31 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-14-2020, 02:07 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by zeeman - 02-14-2020, 02:57 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 02-14-2020, 02:59 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-15-2020, 07:37 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by zeeman - 02-16-2020, 01:27 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by baldur - 02-15-2020, 12:02 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 02-19-2020, 05:39 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 07-18-2020, 07:03 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 07-20-2020, 10:42 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 07-25-2020, 03:51 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 09-09-2020, 07:26 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by jav1 - 09-16-2020, 08:05 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by 50harleyrider - 09-16-2020, 03:17 PM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by X Double Dot - 09-29-2020, 09:18 AM
RE: A discussion on EGT and Exhaust back pressure on an OM606 - by baldur - 09-29-2020, 11:31 AM
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)