OM 606 Turbo, complete rebuild and mechanical Pump

STD Tuning Engine OM 606 Turbo, complete rebuild and mechanical Pump

View a Printable Version

1 Vote(s) - 5 Average

Petar

7.5mm M pump

459

02-12-2020, 03:41 PM #7

(12-15-2019, 04:42 AM)German Diesel Hi,

Yes I have some Pictures from the oil Nozzles here in this forum, for the complete build here is a link to the German Forum:
https://www.multi-board.com/board/index..../&pageNo=1

The Pump work with 9mm elements, I don’t want to mount an intercooler on, because I think I don’t need it and I don’t have space.

The injection nozzle inlets, are also special parts, not Bosch or what else.
I don’t have done a „kick down“ ( I don’t know the English word) I‘ve go slowly to 3500 rpm.

What the 606 made at full fast load, I don’t know, I was scared (-;

https://youtu.be/ii0ZuhKr3bk

When you have questions, please ask

Best reguards Steffen

Wow 9mm elements. That's huge, where did you get those ? I didn't even know so big elements existed for these pumps. What cm3/1000 strokes have you set your pump at (if it's not a secret Angel

) ?

Petar

02-12-2020, 03:41 PM #7

(12-15-2019, 04:42 AM)German Diesel Hi,

Yes I have some Pictures from the oil Nozzles here in this forum, for the complete build here is a link to the German Forum:
https://www.multi-board.com/board/index..../&pageNo=1

The Pump work with 9mm elements, I don’t want to mount an intercooler on, because I think I don’t need it and I don’t have space.

The injection nozzle inlets, are also special parts, not Bosch or what else.
I don’t have done a „kick down“ ( I don’t know the English word) I‘ve go slowly to 3500 rpm.

What the 606 made at full fast load, I don’t know, I was scared (-;

https://youtu.be/ii0ZuhKr3bk

When you have questions, please ask

Best reguards Steffen

Wow 9mm elements. That's huge, where did you get those ? I didn't even know so big elements existed for these pumps. What cm3/1000 strokes have you set your pump at (if it's not a secret Angel

) ?