Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OM 606 oil filter relocation plates
zeeman Offline
Holset
****


Posts: 337
Joined: Jan 2012
Location: Idaho
#1
OM 606 oil filter relocation plates
Who is making oil filter housing relocation plates for the OM 606 to retain the stock filter housing with the thermo check valve ?
09-08-2019, 04:00 PM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 598
Joined: May 2009
Location: PNW
#2
RE: OM 606 oil filter relocation plates
I made my own from a gasket and 3/4" alum plate. A bolt in option would be grabbing an spin on filter housing from an m103 engine and getting a spin on adapter or relocation bracket for remote mount spin on filter if you wanted to get rid of the messy oil tower.
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
09-21-2019, 11:16 AM
Find Reply
SurfRodder Offline
Jackass Extraordinaire
****


Posts: 598
Joined: May 2009
Location: PNW
#3
RE: OM 606 oil filter relocation plates
(09-21-2019, 11:16 AM)SurfRodder Wrote: I made my own from a gasket and 3/4" alum plate. A bolt in option would be grabbing an spin on filter housing from an m103 engine and getting a spin on adapter or relocation bracket for remote mount spin on filter if you wanted to get rid of the messy oil tower.
Actually, I am moving the oil cooler from my w123 onto my w124 during my om606 install (hopefully this weekend)
I already have the factory spin on adapter from an m103 so Im going to get 2 of these:
https://www.amazon.com/10AN-Flare-Adapte...way&sr=8-1
to connect this to the AN oil cooler lines I already have:
https://www.amazon.com/Derale-35703-Prem...way&sr=8-1
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
09-30-2019, 11:53 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)