Where should I start? OM603, OM606 for good torque, reliability and fuel economy.
Where should I start? OM603, OM606 for good torque, reliability and fuel economy.
All is writen above... a 6 cyl 3 liter IDI is what it is!!!
What we use to do in 4X4 vehicles around here is a 7.5mm mech pump, a manual trans, usually 717.43X or 716.xxx , and an upgraded gt23V @ around 2bar.
It works, can't say hp number but it does move a 2.5ton vehicle fast... offroad as a 4x4 will never be a fast vehicle on the road.
Towing is a problem in all diesel motors as they have to be modded for "on load" operation. Instead of what we use to do in road cars or even 4x4 where the load is usually momentarlly... otherwise it won't last much...
U take all info here and take your decision, after if u need help PM.
Wich u luck
FD,
Powered by tractor fuel
Well, according to your needs... and specs...
All is writen above... a 6 cyl 3 liter IDI is what it is!!!
What we use to do in 4X4 vehicles around here is a 7.5mm mech pump, a manual trans, usually 717.43X or 716.xxx , and an upgraded gt23V @ around 2bar.
It works, can't say hp number but it does move a 2.5ton vehicle fast... offroad as a 4x4 will never be a fast vehicle on the road.
Towing is a problem in all diesel motors as they have to be modded for "on load" operation. Instead of what we use to do in road cars or even 4x4 where the load is usually momentarlly... otherwise it won't last much...
U take all info here and take your decision, after if u need help PM.
Wich u luck
FD,
Powered by tractor fuel
1 Guest(s)
1 Guest(s)