STD Tuning Engine HELP!

HELP!

HELP!

 
  • 0 Vote(s) - 0 Average
 
Om606STD
Gwagon OM606 STD

6
05-03-2019, 10:38 AM #1
Hello
Can you please guide me to a good garage near Hamburg with experience in om606 superturbodiesle on my 1998 G class 300? I contacted Stern Garage but they seem busy.
Thanks a lot
Om606STD
05-03-2019, 10:38 AM #1

Hello
Can you please guide me to a good garage near Hamburg with experience in om606 superturbodiesle on my 1998 G class 300? I contacted Stern Garage but they seem busy.
Thanks a lot

AlanMcR
mind - blown

400
05-03-2019, 11:43 PM #2
I'm definitely too far away for hands-on help. Perhaps you could explain what is needed?
Also, did this start out as a G300 w/ OM606a, or something else? I'm curious about what modifications were made.
AlanMcR
05-03-2019, 11:43 PM #2

I'm definitely too far away for hands-on help. Perhaps you could explain what is needed?
Also, did this start out as a G300 w/ OM606a, or something else? I'm curious about what modifications were made.

Om606STD
Gwagon OM606 STD

6
05-04-2019, 01:32 AM #3
(05-03-2019, 11:43 PM)AlanMcR I'm definitely too far away for hands-on help.  Perhaps you could explain what is needed?  
Also, did this start out as a G300 w/ OM606a, or something else?  I'm curious about what modifications 
hello

Can you recommend a professional MB garage with experience in om606 superturbodiesle near Hamburg. I tried Stern Garage but they are busy. My car is 1998 G class 300 td, om606, 8mm myna pump, Garrett ec1 turbo. I want to do is the following at a professional garage not too far from Hamburg:

1. Install a new torque converter that I purchased

2. Optimize superturbodiesle tune (no ECU .. only mechanical)

3. Perform overall inspection and major service on the car

4. Install a few underbody protection parts I got from G-Raid.

Thank you
Om606STD
05-04-2019, 01:32 AM #3

(05-03-2019, 11:43 PM)AlanMcR I'm definitely too far away for hands-on help.  Perhaps you could explain what is needed?  
Also, did this start out as a G300 w/ OM606a, or something else?  I'm curious about what modifications 
hello

Can you recommend a professional MB garage with experience in om606 superturbodiesle near Hamburg. I tried Stern Garage but they are busy. My car is 1998 G class 300 td, om606, 8mm myna pump, Garrett ec1 turbo. I want to do is the following at a professional garage not too far from Hamburg:

1. Install a new torque converter that I purchased

2. Optimize superturbodiesle tune (no ECU .. only mechanical)

3. Perform overall inspection and major service on the car

4. Install a few underbody protection parts I got from G-Raid.

Thank you

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)