OM617 nailing after injector service?
OM617 nailing after injector service?
04-17-2019, 12:07 AM
#2
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
The new nozzles do need to bed in a wee bit. Give it a few thousand miles and see what it does?
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
OM617 nailing after injector service? - by gregman_1 - 04-16-2019, 09:05 PM
RE: OM617 nailing after injector service? - by NZScott - 04-17-2019, 12:07 AM
RE: OM617 nailing after injector service? - by gregman_1 - 04-17-2019, 06:24 PM
RE: OM617 nailing after injector service? - by Volker407 - 06-26-2019, 12:54 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)