Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OM606A EDC 7.5mm, injector nozzles
TBMY Offline
Naturally-aspirated
*


Posts: 3
Joined: Sep 2018
Location: Norway
#1
OM606A EDC 7.5mm, injector nozzles
Hi Experts!

I am going to exchange nozzles from standard ones (Bosch DN0SD310), to Monark ones. There are several nozzle options out there...

I have approx 275HP (1.3 Bar). More important with torque than high HP if there is a difference...

Some nozzles...:
DN0SD261 
vs 
DN0SD265 
vs
DN0SD310
vs
DN0SD314
vs
DN0SD315
vs
DN12SD290
vs
?

Any expererience out there?

All info appreciated!!  Big Grin
(This post was last modified: 04-12-2019, 07:13 AM by TBMY.)
04-12-2019, 07:12 AM
Find Reply
firen456 Offline
TA 0301
**


Posts: 69
Joined: May 2016
Location: europe
#2
RE: OM606A EDC 7.5mm, injector nozzles
I'd try the 265 nozzles. From the named nozzles they performed the best. 310 and everything up makes the engine nail more.
04-14-2019, 04:29 AM
Find Reply
TBMY Offline
Naturally-aspirated
*


Posts: 3
Joined: Sep 2018
Location: Norway
#3
RE: OM606A EDC 7.5mm, injector nozzles
Thanks! Much appreciated!! :-D

Good source for Monark in Europe?
04-14-2019, 12:08 PM
Find Reply
firen456 Offline
TA 0301
**


Posts: 69
Joined: May 2016
Location: europe
#4
RE: OM606A EDC 7.5mm, injector nozzles
I use Bosch nozzles from motorintegrator. Never had Problems with them.
04-18-2019, 01:50 PM
Find Reply
TBMY Offline
Naturally-aspirated
*


Posts: 3
Joined: Sep 2018
Location: Norway
#5
RE: OM606A EDC 7.5mm, injector nozzles
(04-18-2019, 01:50 PM)firen456 Wrote: I use Bosch nozzles from motorintegrator. Never had Problems with them.

Thanks, good to know, which motor and nozzle?  Smile
04-19-2019, 12:31 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)