OM606 into Sprinter
OM606 into Sprinter
01-30-2019, 05:20 PM
#3
I thought it may be the case that the mounting flange on the block was the same distance from the bellhousing flange on the 605 and 606 as they are quite close to halfway along the block on a 606 and have two different positions.
In a w124 for example that came with both 5 and 6 cyl engines I assume the mounting point on the body is in the same place, are the mounts themselves different?
Can anybody tell me if an om60x engine will bolt up to a Sprinter 611 gearbox?
Thanks
engineengineer
01-30-2019, 05:20 PM #3Do you know if there are any mounts available that may allow an OM606 to be fitted into a Sprinter 312 that had OM602?
I thought it may be the case that the mounting flange on the block was the same distance from the bellhousing flange on the 605 and 606 as they are quite close to halfway along the block on a 606 and have two different positions.
In a w124 for example that came with both 5 and 6 cyl engines I assume the mounting point on the body is in the same place, are the mounts themselves different?
Can anybody tell me if an om60x engine will bolt up to a Sprinter 611 gearbox?
Thanks
Messages In This Thread
OM606 into Sprinter - by engineengineer - 01-30-2019, 06:40 AM
RE: OM606 into Sprinter - by barrote - 01-30-2019, 08:13 AM
RE: OM606 into Sprinter - by engineengineer - 01-30-2019, 05:48 PM
RE: OM606 into Sprinter - by engineengineer - 01-30-2019, 05:20 PM
RE: OM606 into Sprinter - by barrote - 02-01-2019, 05:11 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)