OM 606 crankshaft grinding
OM 606 crankshaft grinding
01-30-2019, 05:31 AM
#15
What baldur was saying is that inline 6 and 4 are inherently stable, lets say they are balanced engines as oposed to L3 L5 L7 V4 V6 V8 especially.
So once crank is built it need dinamic balance of crank alone, then when u add rods and pistons this need to be iqual to maintain balance.
On the other hand american style v6 and v8 without balancer shafts need to be balanced and very often a vibration damper is needed.
Our 6 cyl are ok as long u respect piston and crank iqual weights.
FD,
Powered by tractor fuel
No no no
What baldur was saying is that inline 6 and 4 are inherently stable, lets say they are balanced engines as oposed to L3 L5 L7 V4 V6 V8 especially.
So once crank is built it need dinamic balance of crank alone, then when u add rods and pistons this need to be iqual to maintain balance.
On the other hand american style v6 and v8 without balancer shafts need to be balanced and very often a vibration damper is needed.
Our 6 cyl are ok as long u respect piston and crank iqual weights.
FD,
Powered by tractor fuel
Messages In This Thread
OM 606 crankshaft grinding - by zeeman - 01-26-2019, 07:07 PM
RE: OM 606 crankshaft grinding - by barrote - 01-27-2019, 05:02 AM
RE: OM 606 crankshaft grinding - by zeeman - 01-27-2019, 12:48 PM
RE: OM 606 crankshaft grinding - by German Diesel - 01-27-2019, 07:02 AM
RE: OM 606 crankshaft grinding - by baldur - 01-27-2019, 07:49 AM
RE: OM 606 crankshaft grinding - by zeeman - 01-27-2019, 12:44 PM
RE: OM 606 crankshaft grinding - by Turbo - 01-27-2019, 03:14 PM
RE: OM 606 crankshaft grinding - by baldur - 01-27-2019, 05:54 PM
RE: OM 606 crankshaft grinding - by zeeman - 01-27-2019, 10:17 PM
RE: OM 606 crankshaft grinding - by baldur - 01-28-2019, 08:09 AM
RE: OM 606 crankshaft grinding - by zeeman - 01-28-2019, 07:55 PM
RE: OM 606 crankshaft grinding - by baldur - 01-29-2019, 06:36 AM
RE: OM 606 crankshaft grinding - by zeeman - 01-29-2019, 12:53 PM
RE: OM 606 crankshaft grinding - by German Diesel - 01-30-2019, 01:12 AM
RE: OM 606 crankshaft grinding - by barrote - 01-30-2019, 05:31 AM
RE: OM 606 crankshaft grinding - by Keino - 01-30-2019, 12:25 PM
RE: OM 606 crankshaft grinding - by NZScott - 01-30-2019, 11:40 PM
RE: OM 606 crankshaft grinding - by Keino - 01-31-2019, 09:49 AM
RE: OM 606 crankshaft grinding - by zeeman - 02-03-2019, 01:07 PM
RE: OM 606 crankshaft grinding - by zeeman - 02-03-2019, 01:11 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)