Renovation OM 606
Renovation OM 606
01-11-2019, 05:28 AM
#12
(01-10-2019, 06:15 PM)Turbo how much it revs?
The rev limit in the box is set to 5200 Rpm but this summer I could rev max 2800 because the turbo started to give pressure at around 3200 rpm
When I tested the boat the first time with no furnishing in the boat then it rev about 4800 rpm but now with all the furnishing it is to hevey that is why I put a smalle turbo that give pressure from lower rpm
(01-10-2019, 06:15 PM)Turbo how much it revs?
The rev limit in the box is set to 5200 Rpm but this summer I could rev max 2800 because the turbo started to give pressure at around 3200 rpm
When I tested the boat the first time with no furnishing in the boat then it rev about 4800 rpm but now with all the furnishing it is to hevey that is why I put a smalle turbo that give pressure from lower rpm
Messages In This Thread
Renovation OM 606 - by XBB240 - 01-08-2019, 05:23 PM
RE: Renovation OM 606 - by XBB240 - 01-08-2019, 06:20 PM
RE: Renovation OM 606 - by atypicalguy - 01-09-2019, 06:14 AM
RE: Renovation OM 606 - by XBB240 - 01-09-2019, 05:31 PM
RE: Renovation OM 606 - by jav1 - 01-09-2019, 08:56 AM
RE: Renovation OM 606 - by XBB240 - 01-09-2019, 05:50 PM
RE: Renovation OM 606 - by jav1 - 01-10-2019, 08:45 AM
RE: Renovation OM 606 - by XBB240 - 01-10-2019, 05:09 PM
RE: Renovation OM 606 - by Turbo - 01-10-2019, 09:10 AM
RE: Renovation OM 606 - by XBB240 - 01-10-2019, 05:30 PM
RE: Renovation OM 606 - by Turbo - 01-10-2019, 06:15 PM
RE: Renovation OM 606 - by XBB240 - 01-11-2019, 05:28 AM
RE: Renovation OM 606 - by Turbo - 01-11-2019, 02:37 PM
RE: Renovation OM 606 - by jav1 - 01-11-2019, 08:02 AM
RE: Renovation OM 606 - by Anjay1 - 01-12-2019, 12:36 PM
RE: Renovation OM 606 - by Turbo - 01-13-2019, 06:22 AM
RE: Renovation OM 606 - by XBB240 - 01-13-2019, 06:49 PM
RE: Renovation OM 606 - by Turbo - 01-14-2019, 02:19 AM
RE: Renovation OM 606 - by XBB240 - 01-15-2019, 12:06 PM
RE: Renovation OM 606 - by Turbo - 01-16-2019, 02:30 AM
RE: Renovation OM 606 - by atypicalguy - 02-06-2019, 04:44 AM
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)