STD Maintenance General Cruise Control for W123 Manual

Cruise Control for W123 Manual

Cruise Control for W123 Manual

 
  • 0 Vote(s) - 0 Average
 
NZScott
HX30W 73/44mm

398
01-09-2019, 12:35 AM #6
http://www.peachparts.com/Wikka/CruiseControlRostra

I was going to install one of these in my car because I was doing 8.5hr road trips for the last few months but have moved back home so probably won't bother any more.
I was wondering if the speed sensor could work off the crank, that way the engine might be useful for driving something when in neutral


1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




NZScott
01-09-2019, 12:35 AM #6

http://www.peachparts.com/Wikka/CruiseControlRostra

I was going to install one of these in my car because I was doing 8.5hr road trips for the last few months but have moved back home so probably won't bother any more.
I was wondering if the speed sensor could work off the crank, that way the engine might be useful for driving something when in neutral



1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km

1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD




 
  • 0 Vote(s) - 0 Average

Messages In This Thread
Cruise Control for W123 Manual - by Biocruzer - 01-03-2019, 05:32 PM
RE: Cruise Control for W123 Manual - by baldur - 01-03-2019, 09:08 PM
RE: Cruise Control for W123 Manual - by frans-c - 01-07-2019, 06:07 AM
RE: Cruise Control for W123 Manual - by Biocruzer - 01-08-2019, 04:06 PM
RE: Cruise Control for W123 Manual - by frans-c - 01-08-2019, 04:17 PM
RE: Cruise Control for W123 Manual - by NZScott - 01-09-2019, 12:35 AM
RE: Cruise Control for W123 Manual - by frans-c - 01-09-2019, 02:05 AM
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)