OM606.962 Boost Increase stock 6mm pump
OM606.962 Boost Increase stock 6mm pump
I'm no autority in the matter but use to build some pumps...
EDC pump goes 18mm rack in stock form i never exactly measured it by ml but this gives below 90ml. Well pump in stock form. Although is possible to alter the pump untill 110ml i does not worth the assle cause injection time will be to long.
Thats why people use to swap 7.5mm and 8 elements in.
About the turbo , i don't know from each engine it were from, by the name it was from V6 cdi, well that is not the best of turbos for a 606, but it can do the job, and certainly ot will blow past 1.5 easy. But as u know turbo power is directly proportional to fuel injected , and with 90ml u wont go much past 2 bar. I can't say it will hit 2 bar or 1.8 but i can say u can try several targuets and monitor where the engine pull best.
Regards
FD,
Powered by tractor fuel
Hy john,
I'm no autority in the matter but use to build some pumps...
EDC pump goes 18mm rack in stock form i never exactly measured it by ml but this gives below 90ml. Well pump in stock form. Although is possible to alter the pump untill 110ml i does not worth the assle cause injection time will be to long.
Thats why people use to swap 7.5mm and 8 elements in.
About the turbo , i don't know from each engine it were from, by the name it was from V6 cdi, well that is not the best of turbos for a 606, but it can do the job, and certainly ot will blow past 1.5 easy. But as u know turbo power is directly proportional to fuel injected , and with 90ml u wont go much past 2 bar. I can't say it will hit 2 bar or 1.8 but i can say u can try several targuets and monitor where the engine pull best.
Regards
FD,
Powered by tractor fuel
1 Guest(s)
1 Guest(s)