Om 606 prechamber Fail

STD Tuning Engine Om 606 prechamber Fail

View a Printable Version

0 Vote(s) - 0 Average

zeeman

Holset

444

12-16-2018, 10:05 PM #21

(12-15-2018, 09:58 PM)maneyc91 Well my motor and tranny are sitting on the floor next to the car, im waiting on a new piston and rod, just going to swap it in and hope for the best. Gotta have some valve work done too obviously. If I cant get a prechamber after going through all this I dont even know what i ll do. If i see an unsuspecting e300 in the wild they will not be safe. I assume that anything that was assembled by MB and working properly should be left alone as far as inside the motor? Im a pretty good wrench btw, my e36 has a 347 stroker, 76mm turbo,DIYmegasquirt and 8.8 IRS rear end all done by me.

Ill look into that coolant bypass....

Pre chamber part # 606 010 04 52 $185.00

Zeeman

zeeman

12-16-2018, 10:05 PM #21

(12-15-2018, 09:58 PM)maneyc91 Well my motor and tranny are sitting on the floor next to the car, im waiting on a new piston and rod, just going to swap it in and hope for the best. Gotta have some valve work done too obviously. If I cant get a prechamber after going through all this I dont even know what i ll do. If i see an unsuspecting e300 in the wild they will not be safe. I assume that anything that was assembled by MB and working properly should be left alone as far as inside the motor? Im a pretty good wrench btw, my e36 has a 347 stroker, 76mm turbo,DIYmegasquirt and 8.8 IRS rear end all done by me.

Ill look into that coolant bypass....

Pre chamber part # 606 010 04 52 $185.00

Zeeman