om603 Smoke Cold Start up - Cyl 6
om603 Smoke Cold Start up - Cyl 6
10-10-2018, 12:21 AM
#2
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Notice anything in #6 prechamber when you swapped injectors? There's been reports of the little ball thing inside disappearing/melting etc. I presume you would had noticed if #6 injector line didn't have fuel coming out of it.
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
om603 Smoke Cold Start up - Cyl 6 - by ontum - 10-09-2018, 12:19 PM
RE: om603 Smoke Cold Start up - Cyl 6 - by NZScott - 10-10-2018, 12:21 AM
RE: om603 Smoke Cold Start up - Cyl 6 - by ontum - 10-12-2018, 10:43 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)