STD Tuning Engine E-pump inlet pressure

E-pump inlet pressure

E-pump inlet pressure

 View a Printable Version
 
  • 1 Vote(s) - 1 Average
 
Mr.Emo
Find
Nissan Patrol -> 606 conversion.

69
07-11-2018, 01:43 PM #3
Reply
Reply
I am putting a 606 in a patrol with a lift pump. I will make a y with a check valve right infront of the filter on the 606 so the lift pump will "bypass" and circulate back to the tank.
The lift pump on the e pump then only has to suck from the filter.
Mr.Emo
07-11-2018, 01:43 PM #3

I am putting a 606 in a patrol with a lift pump. I will make a y with a check valve right infront of the filter on the 606 so the lift pump will "bypass" and circulate back to the tank.
The lift pump on the e pump then only has to suck from the filter.

Reply
Reply
 View a Printable Version
 
  • 1 Vote(s) - 1 Average

Messages In This Thread
E-pump inlet pressure - by 50harleyrider - 07-06-2018, 06:07 AM
RE: E-pump inlet pressure - by AlanMcR - 07-10-2018, 12:48 PM
RE: E-pump inlet pressure - by Mr.Emo - 07-11-2018, 01:43 PM
RE: E-pump inlet pressure - by AlanMcR - 07-11-2018, 04:08 PM
RE: E-pump inlet pressure - by Mr.Emo - 07-12-2018, 03:25 AM
RE: E-pump inlet pressure - by AlanMcR - 07-12-2018, 11:11 AM
RE: E-pump inlet pressure - by CutWeldDrive - 07-13-2018, 05:19 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-22-2020, 03:47 PM
RE: E-pump inlet pressure - by AlanMcR - 12-22-2020, 04:14 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-22-2020, 04:47 PM
RE: E-pump inlet pressure - by AlanMcR - 12-22-2020, 05:16 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-23-2020, 01:39 AM
RE: E-pump inlet pressure - by 50harleyrider - 12-23-2020, 03:55 PM
RE: E-pump inlet pressure - by AlanMcR - 12-23-2020, 09:56 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-23-2020, 10:15 PM
RE: E-pump inlet pressure - by AlanMcR - 12-24-2020, 03:05 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-25-2020, 12:05 PM
RE: E-pump inlet pressure - by AlanMcR - 12-26-2020, 10:56 PM
RE: E-pump inlet pressure - by 50harleyrider - 12-27-2020, 01:33 PM
RE: E-pump inlet pressure - by AlanMcR - 12-27-2020, 03:20 PM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)