W126 short body OM606
W126 short body OM606
The engine is going to get built a bit so I have a good engine when this one gets too tired, and the DSL1 is nearly wired up in the w126 now. Haven't had a whole lot of time to work on it this year sadly.
Here are the latest updates while I'm on here:
Pump is in and timed, cut a old cruise control module in half for a mounting point for the trans controller, and tapped into the fuel cooler plate for a extra coolant sensor:
Using a later model canbus shifter from a w210, and a throttle pedal from a w212. I was able to get most of the heavy harness work done last spring:
Multiplexing for cruise control, to actually run cruise control instead of using as a shifter:
Hopefully this winter I can get the rest of the electrical done, then at least drive it a bit before going into the manifold and rear end projects.
I kept all the goodies off the w116 and parted the rest of it out. I did end up finding your build on 4bt, heck of a lot of sweat in that engine! Your swap is awesome!
The engine is going to get built a bit so I have a good engine when this one gets too tired, and the DSL1 is nearly wired up in the w126 now. Haven't had a whole lot of time to work on it this year sadly.
Here are the latest updates while I'm on here:
Pump is in and timed, cut a old cruise control module in half for a mounting point for the trans controller, and tapped into the fuel cooler plate for a extra coolant sensor:
Using a later model canbus shifter from a w210, and a throttle pedal from a w212. I was able to get most of the heavy harness work done last spring:
Multiplexing for cruise control, to actually run cruise control instead of using as a shifter:
Hopefully this winter I can get the rest of the electrical done, then at least drive it a bit before going into the manifold and rear end projects.
2 Guest(s)
2 Guest(s)