STD Tuning Engine Spare port in head

Spare port in head

Spare port in head

 
  • 0 Vote(s) - 0 Average
 
Antonytriolo
Naturally-aspirated

16
03-23-2018, 03:03 PM #1
ive now done the oil pressure sender for my digital dash 
Now to do the water temperature, I was going to fit a T piece and put the original Mercedes one and one supplied with my dash but there's not enough room with the way I was going to do it. 
I have noticed there's a port next to the original temperature sender circled, what is this going to, the water way or something elsewhere?
[Image: 29511847_10216326597577246_8785339937568...9B981&dl=1]
Antonytriolo
03-23-2018, 03:03 PM #1

ive now done the oil pressure sender for my digital dash 
Now to do the water temperature, I was going to fit a T piece and put the original Mercedes one and one supplied with my dash but there's not enough room with the way I was going to do it. 
I have noticed there's a port next to the original temperature sender circled, what is this going to, the water way or something elsewhere?
[Image: 29511847_10216326597577246_8785339937568...9B981&dl=1]

Mallinman
GT2256V

101
03-24-2018, 06:36 AM #2
On mine I drilled and tapped into the head just behind where the pipe comes out the head to feed the top radiator hose. Plenty of space there

Mitsubishi L200 manual om605  
7.5mm Bosch 044 fed pump 
Borgwarner S200 
Mallinman
03-24-2018, 06:36 AM #2

On mine I drilled and tapped into the head just behind where the pipe comes out the head to feed the top radiator hose. Plenty of space there


Mitsubishi L200 manual om605  
7.5mm Bosch 044 fed pump 
Borgwarner S200 

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)