Lug bolt info needed
Lug bolt info needed
11-16-2009, 02:12 PM
#6
Required Lug Bolts for 18" wheels:
12mm x 1.5 thread, 17mm head, ball seat, 24mm thread length
OEM Lug Bolts for 16" wheels:
12mm x 1.5 thread, 17mm head, ball seat, 39mm thread length
So far, so good on the 18" monoblocks. My vibration issue mostly disappeared with the "new" wheels/tires...so I must have had some really out of balance rolling stock before. Yikes.
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
11-16-2009, 02:12 PM #6Here's the lug bolt info I've come up with for the 18" replica monoblocks versus the OEM wheels on my W210:
Required Lug Bolts for 18" wheels:
12mm x 1.5 thread, 17mm head, ball seat, 24mm thread length
OEM Lug Bolts for 16" wheels:
12mm x 1.5 thread, 17mm head, ball seat, 39mm thread length
So far, so good on the 18" monoblocks. My vibration issue mostly disappeared with the "new" wheels/tires...so I must have had some really out of balance rolling stock before. Yikes.
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
Messages In This Thread
Lug bolt info needed - by HoleshotHolset - 11-02-2009, 12:43 PM
RE: Lug bolt info needed - by winmutt - 11-02-2009, 02:16 PM
RE: Lug bolt info needed - by HoleshotHolset - 11-02-2009, 04:30 PM
RE: Lug bolt info needed - by HoleshotHolset - 11-03-2009, 09:42 AM
RE: Lug bolt info needed - by winmutt - 11-03-2009, 03:50 PM
RE: Lug bolt info needed - by HoleshotHolset - 11-16-2009, 02:12 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)