STD Other FS / WTB / Buying guides OM605 engine and gearbox

OM605 engine and gearbox

OM605 engine and gearbox

 
  • 0 Vote(s) - 0 Average
 
Fatman
Naturally-aspirated

16
01-22-2018, 06:03 PM #1
I have an OM605 turbo diesel engine and gearbox here that I bought for my old 190. However, I have since scrapped the car and no longer need the engine. 

I have: 

OM605 engine (with 138,000 miles on it)
Manual Gearbox from a C250 W202... I will check the codes on the gearbox
C250 turbo
C250 inlet (one on the engine is broken)
Gear shifter linkage from a W202 C250

I would like £300GBP for this engine and gearbox set up. I can grab some pics if you need them. 

I also have a W124 250D OM602 that I planned to use the pump, engine mount arms, wiring harness, vacuum pump, etc. from too... engine runs good tho so I will sell complete too if you are interested. 

I can ship this stuff wherever you need, it just may take a few weeks for me to get it all wrapped up and ready to ship. I am based in Banbridge in Northern Ireland. 

Thanks
Stefan
Fatman
01-22-2018, 06:03 PM #1

I have an OM605 turbo diesel engine and gearbox here that I bought for my old 190. However, I have since scrapped the car and no longer need the engine. 

I have: 

OM605 engine (with 138,000 miles on it)
Manual Gearbox from a C250 W202... I will check the codes on the gearbox
C250 turbo
C250 inlet (one on the engine is broken)
Gear shifter linkage from a W202 C250

I would like £300GBP for this engine and gearbox set up. I can grab some pics if you need them. 

I also have a W124 250D OM602 that I planned to use the pump, engine mount arms, wiring harness, vacuum pump, etc. from too... engine runs good tho so I will sell complete too if you are interested. 

I can ship this stuff wherever you need, it just may take a few weeks for me to get it all wrapped up and ready to ship. I am based in Banbridge in Northern Ireland. 

Thanks
Stefan

Fatman
Naturally-aspirated

16
01-29-2018, 03:25 PM #2
Bump!
Fatman
01-29-2018, 03:25 PM #2

Bump!

sassparilla_kid
diesel > all other fuels

1,618
05-06-2018, 12:42 PM #3
Dang I'd be interested but shipping to California would probably be killer!

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-06-2018, 12:42 PM #3

Dang I'd be interested but shipping to California would probably be killer!


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

Fatman
Naturally-aspirated

16
09-21-2018, 02:23 PM #4
Still have this if anyone is interested.
Fatman
09-21-2018, 02:23 PM #4

Still have this if anyone is interested.

Anjay1
K26-2

38
09-26-2018, 06:30 PM #5
I send you pm.
Anjay1
09-26-2018, 06:30 PM #5

I send you pm.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)