OM60x timing device information
OM60x timing device information
02-13-2018, 05:11 AM
#6
(01-16-2018, 05:48 PM)baldur The engine pings like a machine gun at low RPM unless I retard the pump. I do however have it running smoothly at higher speeds and loads but it still is a bit rough at low RPM. Leading me to believe it would be of benefit to pull a couple of degrees out up to 2000RPM.
That could be interesting for me too. I also have noise above 2000rpm that dissapears above that.
Maybe that is because of the 7,5mm elements.
(01-16-2018, 05:48 PM)baldur The engine pings like a machine gun at low RPM unless I retard the pump. I do however have it running smoothly at higher speeds and loads but it still is a bit rough at low RPM. Leading me to believe it would be of benefit to pull a couple of degrees out up to 2000RPM.
That could be interesting for me too. I also have noise above 2000rpm that dissapears above that.
Maybe that is because of the 7,5mm elements.
Messages In This Thread
OM60x timing device information - by baldur - 01-15-2018, 08:33 PM
RE: OM60x timing device information - by Evgeniy1987 - 01-16-2018, 10:38 AM
RE: OM60x timing device information - by baldur - 01-16-2018, 11:13 AM
RE: OM60x timing device information - by Turbo - 01-16-2018, 04:15 PM
RE: OM60x timing device information - by baldur - 01-16-2018, 05:48 PM
RE: OM60x timing device information - by addi.bigg - 02-13-2018, 05:11 AM
RE: OM60x timing device information - by baldur - 02-13-2018, 07:16 PM
RE: OM60x timing device information - by addi.bigg - 02-14-2018, 01:04 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)