atm gearbox rebulid 722.6
atm gearbox rebulid 722.6
01-11-2018, 03:24 PM
#10
The factory limited input tq to around 350nm maximum during a shift. No matter if it was a 4 cyl or a v12tt.
whipplem104
01-11-2018, 03:24 PM #10It does not matter what controller is running a transmission. At some point there is not enough pressure to complete a shift in the appropriate amount of time. Typically you will find that at around 500-550 whp/wtq that a stock v8 configuration trans will not last long. Without tq management. You will start to see flair in the 3-4 shift at around 450-500 fw/hp with no torque management. If it is tuned properly. That is about the limit. Then valve body modifications and or other things start to be a requirement.
The factory limited input tq to around 350nm maximum during a shift. No matter if it was a 4 cyl or a v12tt.
Messages In This Thread
atm gearbox rebulid 722.6 - by peter - 01-08-2018, 06:01 AM
RE: atm gearbox rebulid 722.6 - by whipplem104 - 01-08-2018, 08:57 AM
RE: atm gearbox rebulid 722.6 - by peter - 01-08-2018, 02:21 PM
RE: atm gearbox rebulid 722.6 - by whipplem104 - 01-08-2018, 11:10 PM
RE: atm gearbox rebulid 722.6 - by peter - 01-09-2018, 01:32 AM
RE: atm gearbox rebulid 722.6 - by whipplem104 - 01-09-2018, 09:11 AM
RE: atm gearbox rebulid 722.6 - by peter - 01-10-2018, 06:43 AM
RE: atm gearbox rebulid 722.6 - by whipplem104 - 01-10-2018, 08:58 AM
RE: atm gearbox rebulid 722.6 - by Fishman - 01-10-2018, 11:03 AM
RE: atm gearbox rebulid 722.6 - by whipplem104 - 01-11-2018, 03:24 PM
RE: atm gearbox rebulid 722.6 - by peter - 01-13-2018, 05:25 AM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)