STD Tuning Engine OM605 running rough

OM605 running rough

OM605 running rough

 
  • 0 Vote(s) - 0 Average
 
Petar
7.5mm M pump

459
01-07-2018, 05:08 AM #1
So I have a '96 c250 with a mechanical pump from om602 non turbo.Besides from low power(the pump only fuels for a NA OM602 so i have like 90-100hp) it was running ok. Last year i noticed a slight clicking from the engine, sounded like it's coming from the head. Recently it started running rough, especially when cold but it starts ok. It will run rough until it warms up then it sounds like it has a bad injector. I can hear a chuffing sound from the intake manifold and my guess is that i'm loosing compression through the intake valve. I haven't yet taken off the manifold to check. What could the reason be ? Bad lifter ? Burnt valve ??

Oh and I'm also loosing coolant. It started with 1 liter every year and now I'm loosing 1 liter in about 2 months. No obvious leaks. Could this be related somehow ? Bad head gasket due to overheating ??
This post was last modified: 01-07-2018, 05:13 AM by Petar.
Petar
01-07-2018, 05:08 AM #1

So I have a '96 c250 with a mechanical pump from om602 non turbo.Besides from low power(the pump only fuels for a NA OM602 so i have like 90-100hp) it was running ok. Last year i noticed a slight clicking from the engine, sounded like it's coming from the head. Recently it started running rough, especially when cold but it starts ok. It will run rough until it warms up then it sounds like it has a bad injector. I can hear a chuffing sound from the intake manifold and my guess is that i'm loosing compression through the intake valve. I haven't yet taken off the manifold to check. What could the reason be ? Bad lifter ? Burnt valve ??

Oh and I'm also loosing coolant. It started with 1 liter every year and now I'm loosing 1 liter in about 2 months. No obvious leaks. Could this be related somehow ? Bad head gasket due to overheating ??

 
  • 0 Vote(s) - 0 Average

Messages In This Thread
OM605 running rough - by Petar - 01-07-2018, 05:08 AM
RE: OM605 running rough - by addi.bigg - 01-07-2018, 11:50 AM
RE: OM605 running rough - by Petar - 01-11-2018, 12:48 PM
RE: OM605 running rough - by Petar - 02-19-2018, 03:32 PM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)