OM617 Intake Modification for IC
OM617 Intake Modification for IC
05-19-2017, 12:04 PM
#4
(05-19-2017, 12:15 AM)R-3350 my recommendation would be to look into any one of the various N/A intakes as they tend to be better flowing and easier to set up for inter-coolers. the best of course would be the 115 manifold but they are hard to find and expensive. baring that you may be able to fit a later N/A manifold as the 110 should have ample engine bay room. finally if you really want to keep the turbo manifold i would recomend welding on a v-band flange to the front of the manifold to make assembly and removal easier then just use silicone and pipe sections to plumb the rest.
Thanks - there was one a N/A intake on ebay recently that I just missed. The 110 does have a lot of room so most anything should fit.
Could call on the V-band flange. I used them for the exhaust i built and they work really well.
(05-19-2017, 12:15 AM)R-3350 my recommendation would be to look into any one of the various N/A intakes as they tend to be better flowing and easier to set up for inter-coolers. the best of course would be the 115 manifold but they are hard to find and expensive. baring that you may be able to fit a later N/A manifold as the 110 should have ample engine bay room. finally if you really want to keep the turbo manifold i would recomend welding on a v-band flange to the front of the manifold to make assembly and removal easier then just use silicone and pipe sections to plumb the rest.
Thanks - there was one a N/A intake on ebay recently that I just missed. The 110 does have a lot of room so most anything should fit.
Could call on the V-band flange. I used them for the exhaust i built and they work really well.
Messages In This Thread
OM617 Intake Modification for IC - by don - 05-18-2017, 08:26 PM
RE: OM617 Intake Modification for IC - by R-3350 - 05-19-2017, 12:15 AM
RE: OM617 Intake Modification for IC - by don - 05-19-2017, 12:04 PM
RE: OM617 Intake Modification for IC - by Alec300SD - 05-19-2017, 01:54 AM
RE: OM617 Intake Modification for IC - by don - 05-19-2017, 12:04 PM
RE: OM617 Intake Modification for IC - by Dark Hawk - 05-19-2017, 01:38 PM
RE: OM617 Intake Modification for IC - by don - 05-25-2017, 10:12 AM
RE: OM617 Intake Modification for IC - by Hario' - 05-21-2017, 10:54 AM
RE: OM617 Intake Modification for IC - by don - 05-25-2017, 10:22 AM
RE: OM617 Intake Modification for IC - by zeeman - 05-21-2017, 08:29 PM
RE: OM617 Intake Modification for IC - by don - 05-25-2017, 10:29 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)