Oil Cooler Repair
Oil Cooler Repair
06-09-2017, 07:51 PM
#4
Unfortunately it has a slight leak from the fins somewhere so I'm converting to AN10 now with a new cooler
This post was last modified: 06-09-2017, 07:55 PM by NZScott.
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
I had stripped threads on mine, took out the M18x1.5 fitting out of my spare engine's oil filter housing and got a workshop to tap and install it
Unfortunately it has a slight leak from the fins somewhere so I'm converting to AN10 now with a new cooler
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
Oil Cooler Repair - by OM616 - 04-23-2017, 10:32 PM
RE: Oil Cooler Repair - by daniel - 05-10-2017, 10:31 AM
RE: Oil Cooler Repair - by martureo - 06-09-2017, 02:50 PM
RE: Oil Cooler Repair - by NZScott - 06-09-2017, 07:51 PM
RE: Oil Cooler Repair - by OM616 - 06-10-2017, 11:56 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)