Oil Cooler Repair
Oil Cooler Repair
04-23-2017, 10:32 PM
#1
This is how I fixed it.. I cut off the striped threads and machined it flat. Then taped it with a 5/8-11 tap. Then I made a brass male to male adapter with a class 3, 5/8-11 thread on one end and a M22X1.5 thread on the other.
I had to change my oil cooler lines and of course the cooler threads stayed in the nut on one of the fittings.
This is how I fixed it.. I cut off the striped threads and machined it flat. Then taped it with a 5/8-11 tap. Then I made a brass male to male adapter with a class 3, 5/8-11 thread on one end and a M22X1.5 thread on the other.
Messages In This Thread
Oil Cooler Repair - by OM616 - 04-23-2017, 10:32 PM
RE: Oil Cooler Repair - by daniel - 05-10-2017, 10:31 AM
RE: Oil Cooler Repair - by martureo - 06-09-2017, 02:50 PM
RE: Oil Cooler Repair - by NZScott - 06-09-2017, 07:51 PM
RE: Oil Cooler Repair - by OM616 - 06-10-2017, 11:56 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)