STD Tuning Engine OM617 oil feed

OM617 oil feed

OM617 oil feed

 
  • 0 Vote(s) - 0 Average
 
cjcosta
TA 0301

51
04-11-2017, 05:18 AM #1
Can someone tell me the size of tread of turbo oil feed for OM617a (block side)

Best Regards,

Carlos
cjcosta
04-11-2017, 05:18 AM #1

Can someone tell me the size of tread of turbo oil feed for OM617a (block side)

Best Regards,

Carlos

R-3350
Dreaming of compounds

182
04-15-2017, 10:20 PM #2
its an m14 by 1.5 banjo i believe. I replaced mine a while ago with a flex line to my new turbo. its around 40-48 inches from the stock fitting on the filter housing to the turbo FYI if you are going to use a flex line.
R-3350
04-15-2017, 10:20 PM #2

its an m14 by 1.5 banjo i believe. I replaced mine a while ago with a flex line to my new turbo. its around 40-48 inches from the stock fitting on the filter housing to the turbo FYI if you are going to use a flex line.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)