Thread Rating:
  • 3 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FAQ EDC Pumps / W202/W210 W463 ECU’s
baldur Offline
Fast
****


Posts: 336
Joined: Dec 2013
Location: Iceland
#51
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
(02-01-2018, 02:53 AM)Mr.Emo Wrote: Yes. I was talking about the thing you solder into the ecu and reprogram the ews module.

But I was wondering about the egr, maf etc if they will work in standalone car with just the ews removed. Smile

Yes that will work.
Baldur Gislason

02-01-2018, 05:33 AM
Website Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#52
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Thanks Baldur. I just need to get my car approved with everything original before I'm able to use your ecu. Smile
02-01-2018, 06:19 AM
Find Reply
AlanMcR Offline
mind - blown
****


Posts: 273
Joined: May 2009
Location: USA
#53
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
The EGR and MAF are directly wired into the ECU, so they will come as part of the wiring package. They will work.
02-01-2018, 09:54 AM
Find Reply
starynovy Offline
Holset
****


Posts: 312
Joined: Sep 2014
Location: Central Europe
#54
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Have anyone figured out which code block is used? Pretty anoying to do every change 8 times. Big Grin
-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
02-09-2018, 02:02 PM
Find Reply
oleg213 Offline
Naturally-aspirated
*


Posts: 18
Joined: Mar 2013
Location: Minsk, Republic of Belarus
#55
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
(02-09-2018, 02:02 PM)starynovy Wrote: Have anyone figured out which code block is used? Pretty anoying to do every change 8 times. Big Grin
 the system checks the checksum, accordingly all 8 blocks must match
like only 5 and 6 blocks have differences
02-10-2018, 01:38 PM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#56
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Is there an alternative glow plug relay one can use? Or is the oem only way to go? Seeing the output says (k-line).
03-12-2018, 02:03 PM
Find Reply
oleg213 Offline
Naturally-aspirated
*


Posts: 18
Joined: Mar 2013
Location: Minsk, Republic of Belarus
#57
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
W124 relay works standalone
03-13-2018, 05:27 AM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#58
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Hmm. Then I would also need the wiring. I have from w210 but I forgot to take out the glow plug relay. That's why I'm asking if the signal from the ecu is just a 12v signal so I can use whichever relay I desire or not. Smile
03-13-2018, 12:13 PM
Find Reply
AlanMcR Offline
mind - blown
****


Posts: 273
Joined: May 2009
Location: USA
#59
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
The W210 glow plug relay is controlled by something more complex than a simple 12V "go" signal. Some friends tried to get one to work without the ECU and didn't have any luck at all. The relay also passes data back to the ECU indicating success/failure of the glow cycle. If you are using the W210 instrument cluster, it will report glow plug issues recorded by the ECU.
03-13-2018, 01:06 PM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#60
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
The engine is going into a patrol so that's not going to happen. I guess I will have to make a solution myself then.
03-13-2018, 02:35 PM
Find Reply
oleg213 Offline
Naturally-aspirated
*


Posts: 18
Joined: Mar 2013
Location: Minsk, Republic of Belarus
#61
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
[Image: 76141d1263185263-diagnosing-glow-control...-23.46.jpg]
50- start signal
31- ground
15- ignition sw on
LA- signal lamp
T- engine temperature sensor
30- +12v terminal 
61-66 - glow plugs
03-13-2018, 03:09 PM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#62
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Anyone that know what the signal to 80 Air Conditioning on the schematics looks like? Is it a signal that tells the ECU that the AC compressor is running? Any help greatly appreciated. Smile
06-11-2018, 01:14 PM
Find Reply
AlanMcR Offline
mind - blown
****


Posts: 273
Joined: May 2009
Location: USA
#63
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Is the number 80 a pin number or a circuit number? As far as I can tell there is no connection between the AC and the ECU on the OM606.964. The built-in idle stabilization handles the extra load of the AC compressor all by itself.
06-12-2018, 09:55 AM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#64
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
It's the item number in the first post and uses pin 16 on the ecu. I've got no clue tried looking in the workshop manual. But it's really hard to find anything in there.
06-12-2018, 03:06 PM
Find Reply
AlanMcR Offline
mind - blown
****


Posts: 273
Joined: May 2009
Location: USA
#65
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
I see. Pin 16 is unused on the G300 (1996->2000). The wiring diagram for the 1997 E300 (non-turbo) shows the pin as unused too.
06-12-2018, 03:35 PM
Find Reply
Mr.Emo Offline
Nissan Patrol -> 606 conversion.
**


Posts: 62
Joined: Jul 2017
Location: Norway
#66
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
My engine comes from a 98 w210 with turbo. And I've got a wire comming out of pin 16. Guess I have to do some more research. Smile
06-13-2018, 12:33 AM
Find Reply
AlanMcR Offline
mind - blown
****


Posts: 273
Joined: May 2009
Location: USA
#67
RE: FAQ EDC Pumps / W202/W210 W463 ECU’s
Please do. It would be good to know where it goes, what the signal is, and what the ECU actually does differently when it gets the signal.
06-14-2018, 01:53 PM
Find Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)