STD Maintenance General OM605 / OM606 Block heater (US Spec)

OM605 / OM606 Block heater (US Spec)

OM605 / OM606 Block heater (US Spec)

 
  • 0 Vote(s) - 0 Average
 
Hario'
C300TD Wagon (W202)

894
11-27-2016, 02:50 PM #1
Hello

Reading internet tells me all the US spec 605/606 came with a block heater directly under the exhaust manifold, and were not connected unless you request from the dealer for the mains cord to be fitted (free) !

My Euro spec one has a big blanking plug where the block heater would go, presumably optional here.

Can anyone in the US check and see if they have one, or any info of people using it?

I would like to acquire & fit one for myself..

Source of info:

http://www.peachparts.com/Wikka/OM606BlockHeater

Beers, Harold.




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
11-27-2016, 02:50 PM #1

Hello

Reading internet tells me all the US spec 605/606 came with a block heater directly under the exhaust manifold, and were not connected unless you request from the dealer for the mains cord to be fitted (free) !

My Euro spec one has a big blanking plug where the block heater would go, presumably optional here.

Can anyone in the US check and see if they have one, or any info of people using it?

I would like to acquire & fit one for myself..

Source of info:

http://www.peachparts.com/Wikka/OM606BlockHeater

Beers, Harold.





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

Om606w201
K26-2

45
11-28-2016, 10:58 AM #2
(11-27-2016, 02:50 PM)Hario Hello

Reading internet tells me all the US spec 605/606 came with a block heater directly under the exhaust manifold, and were not connected unless you request from the dealer for the mains cord to be fitted (free) !

My Euro spec one has a big blanking plug where the block heater would go, presumably optional here.

Can anyone in the US check and see if they have one, or any info of people using it?

I would like to acquire & fit one for myself..

Source of info:

http://www.peachparts.com/Wikka/OM606BlockHeater

Beers, Harold.
Harold,

Yes, this is right. Mine does have one.
Just need to get a hold of the cord so that i can plug mine in.

JJ
Om606w201
11-28-2016, 10:58 AM #2

(11-27-2016, 02:50 PM)Hario Hello

Reading internet tells me all the US spec 605/606 came with a block heater directly under the exhaust manifold, and were not connected unless you request from the dealer for the mains cord to be fitted (free) !

My Euro spec one has a big blanking plug where the block heater would go, presumably optional here.

Can anyone in the US check and see if they have one, or any info of people using it?

I would like to acquire & fit one for myself..

Source of info:

http://www.peachparts.com/Wikka/OM606BlockHeater

Beers, Harold.
Harold,

Yes, this is right. Mine does have one.
Just need to get a hold of the cord so that i can plug mine in.

JJ

Sultzi
GT2256V

102
11-28-2016, 12:06 PM #3
Here you can get Defa or Calix made heater for the om60x engines and wiring also, not big of a deal.
[Image: 459218.jpg]

That us spec heater seems a bit toy like..
Sultzi
11-28-2016, 12:06 PM #3

Here you can get Defa or Calix made heater for the om60x engines and wiring also, not big of a deal.
[Image: 459218.jpg]

That us spec heater seems a bit toy like..

nord
Naturally-aspirated

22
01-22-2017, 05:25 PM #4
Sultzi, I have a block heater at where I would expect a freeze plug for cylinder #6 to be. It looks very similar to the one in your picture, I'll try to remember to take a picture of it tomorrow.

Anyway, what I would need for it is a cable, or even better, a connector so I can make my own cable. Anyone has an idea where to get one? 3 prongs, I think pretty similar to this picture.
nord
01-22-2017, 05:25 PM #4

Sultzi, I have a block heater at where I would expect a freeze plug for cylinder #6 to be. It looks very similar to the one in your picture, I'll try to remember to take a picture of it tomorrow.

Anyway, what I would need for it is a cable, or even better, a connector so I can make my own cable. Anyone has an idea where to get one? 3 prongs, I think pretty similar to this picture.

AlanMcR
mind - blown

400
08-15-2020, 12:26 PM #5
Anyone have the part number for a US spec block heater for the OM606?
AlanMcR
08-15-2020, 12:26 PM #5

Anyone have the part number for a US spec block heater for the OM606?

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)