STD Other Projects bmw e36 with om606 few questions

bmw e36 with om606 few questions

bmw e36 with om606 few questions

 
  • 0 Vote(s) - 0 Average
 
cable ties
Naturally-aspirated

4
10-30-2016, 03:32 PM #1
Hi all first post on the forum. 

I currently own bmw e36 325tds m51 with all bolt on mods and envy mod. 

after much research I keep coming against brick wall the m51 been a weak engine. 

A looking into bolting a om606 in its place but have few questions.

looking 450@flywheel 

best gearbox to use the standard 325tds box take the abuse ? Or better off with different. 

how much wiring is involved with a om606 if I run on mechanical pump as don't want to be messing about forever with electric fault.  Not to bothered about extras car is dedicated track car .
cable ties
10-30-2016, 03:32 PM #1

Hi all first post on the forum. 

I currently own bmw e36 325tds m51 with all bolt on mods and envy mod. 

after much research I keep coming against brick wall the m51 been a weak engine. 

A looking into bolting a om606 in its place but have few questions.

looking 450@flywheel 

best gearbox to use the standard 325tds box take the abuse ? Or better off with different. 

how much wiring is involved with a om606 if I run on mechanical pump as don't want to be messing about forever with electric fault.  Not to bothered about extras car is dedicated track car .

Antonio
TA 0301

58
12-14-2016, 03:08 AM #2
With mechanical IP you have only glow plug wiring and starter wiring to get it running...
you should get IP that gets more fuel or tuning yours at dieselmeken or somewhere else...
Antonio
12-14-2016, 03:08 AM #2

With mechanical IP you have only glow plug wiring and starter wiring to get it running...
you should get IP that gets more fuel or tuning yours at dieselmeken or somewhere else...

BoostedW124
TA 0301

59
02-07-2017, 06:27 AM #3
How to attach glow plug relay to keyed start?
BoostedW124
02-07-2017, 06:27 AM #3

How to attach glow plug relay to keyed start?

nord
Naturally-aspirated

22
02-13-2017, 03:16 PM #4
Take any ignition + source to it.
nord
02-13-2017, 03:16 PM #4

Take any ignition + source to it.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)