STD Other Projects Long project: ELITE. ELectronical Injection Timing Enhancement.

Long project: ELITE. ELectronical Injection Timing Enhancement.

Long project: ELITE. ELectronical Injection Timing Enhancement.

 
  • 4 Vote(s) - 5 Average
 
R-3350
Dreaming of compounds

182
09-22-2016, 07:55 PM #13
i was thinking the cam phaser itself could supply the feed back necessary. the DSL1 doesn't need an injection sensor to work on the stock 60X edc pump. the electronic cam phaser you intend to use must have built in position feedback to allow the ecu to control it. you could just run the pump with the torque sensor between it and the pump and a set of calibrated injectors hooked up to provide the hydraulic loading necessary to show the full load driving torque necessary. then just select the cam phaser model that can handle the requisite load. use the position feedback from that combined with the crank position sensor gives you the SOI by referencing the two vs a static table. you would need to know the degree at which each element on the pump begins delivery to build the static table, but this is established when the pump is built. if you read through the early thread detailing when Dieselmeken first started making 7.5mm elements he talks about the phasing of SOD of each element relative to the others in degrees of pump rotation. i believe he said the factory tolerance was .5 degree.
R-3350
09-22-2016, 07:55 PM #13

i was thinking the cam phaser itself could supply the feed back necessary. the DSL1 doesn't need an injection sensor to work on the stock 60X edc pump. the electronic cam phaser you intend to use must have built in position feedback to allow the ecu to control it. you could just run the pump with the torque sensor between it and the pump and a set of calibrated injectors hooked up to provide the hydraulic loading necessary to show the full load driving torque necessary. then just select the cam phaser model that can handle the requisite load. use the position feedback from that combined with the crank position sensor gives you the SOI by referencing the two vs a static table. you would need to know the degree at which each element on the pump begins delivery to build the static table, but this is established when the pump is built. if you read through the early thread detailing when Dieselmeken first started making 7.5mm elements he talks about the phasing of SOD of each element relative to the others in degrees of pump rotation. i believe he said the factory tolerance was .5 degree.

 
  • 4 Vote(s) - 5 Average

Messages In This Thread
Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 09-19-2016, 03:58 PM
RE: Long project: injection pump phaser. - by R-3350 - 09-19-2016, 08:53 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-20-2016, 03:11 AM
RE: Long project: injection pump phaser. - by dieselaron - 09-20-2016, 09:12 AM
RE: Long project: injection pump phaser. - by starynovy - 09-21-2016, 03:10 PM
RE: Long project: injection pump phaser. - by R-3350 - 09-21-2016, 03:54 PM
RE: Long project: injection pump phaser. - by starynovy - 09-21-2016, 04:11 PM
RE: Long project: injection pump phaser. - by R-3350 - 09-21-2016, 04:57 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-22-2016, 11:31 AM
RE: Long project: injection pump phaser. - by starynovy - 09-22-2016, 02:33 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-22-2016, 03:54 PM
RE: Long project: injection pump phaser. - by starynovy - 09-22-2016, 04:47 PM
RE: Long project: injection pump phaser. - by R-3350 - 09-22-2016, 07:55 PM
RE: Long project: injection pump phaser. - by SurfRodder - 09-22-2016, 08:04 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-23-2016, 07:07 AM
RE: Long project: injection pump phaser. - by starynovy - 09-23-2016, 09:57 AM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-23-2016, 01:14 PM
RE: Long project: injection pump phaser. - by starynovy - 09-23-2016, 04:35 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 09-27-2016, 01:31 PM
RE: Long project: injection pump phaser. - by Hario' - 09-30-2016, 09:15 AM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 10-02-2016, 03:48 AM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 10-02-2016, 12:52 PM
RE: Long project: injection pump phaser. - by starynovy - 10-02-2016, 03:52 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 10-03-2016, 02:32 PM
RE: Long project: injection pump phaser. - by R-3350 - 10-03-2016, 04:09 PM
RE: Long project: injection pump phaser. - by Evgeniy1987 - 10-04-2016, 06:28 AM
RE: Long project: injection pump phaser. - by SurfRodder - 10-12-2016, 03:25 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 10-12-2016, 12:32 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by hooblah - 10-19-2016, 12:11 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 10-19-2016, 04:20 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 11-04-2016, 02:36 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by SurfRodder - 11-04-2016, 02:55 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 11-04-2016, 03:13 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 12-07-2016, 06:56 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 12-07-2016, 04:26 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 12-08-2016, 03:43 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 12-09-2016, 03:58 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Tobulus - 12-08-2016, 08:30 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 12-08-2016, 10:42 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 02-12-2017, 04:08 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by SurfRodder - 02-12-2017, 07:17 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 02-14-2017, 02:32 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by baldur - 02-15-2017, 05:42 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Anjay1 - 02-15-2017, 10:05 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 02-16-2017, 01:03 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by EvoPeter - 08-17-2017, 11:53 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 08-18-2017, 10:05 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 10-05-2017, 11:38 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 10-07-2017, 07:02 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Simpler=Better - 10-23-2017, 01:24 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by starynovy - 01-15-2018, 09:21 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-15-2018, 03:10 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by starynovy - 01-15-2018, 05:09 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-16-2018, 03:59 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by starynovy - 01-17-2018, 10:32 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-17-2018, 03:42 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by starynovy - 01-18-2018, 05:11 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-18-2018, 06:55 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 01-24-2018, 05:51 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-25-2018, 01:02 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 01-25-2018, 03:09 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-25-2018, 03:19 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 01-25-2018, 05:50 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Turbo - 01-26-2018, 03:35 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 01-28-2018, 10:57 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by atypicalguy - 11-21-2019, 07:29 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by atypicalguy - 11-21-2019, 08:17 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by baldur - 01-26-2018, 11:42 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 01-28-2018, 10:37 AM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by Evgeniy1987 - 03-02-2018, 01:08 PM
RE: Long project: ELITE. ELectronical Injection Timing Enhancement. - by SurfRodder - 09-21-2019, 11:49 AM
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)