Expiremental OM617 build
Expiremental OM617 build
Its been a while since i posted, but life has been busy lately so i haven't had much time to get a lot done on my car. got the 8mm Dieselmeken M pump in along with a carter P4601HP fuel pump and a much larger fuel filter to feed the beast. the M pump is set to 175cc and 5200rpm full load with full fuel cut probably somewhere around 6500-7500 rpm. im using the external alda to limit the output to somewhere around 120cc as thats as much as i can burn right now with the he221w set to 30psi. working on building the new exhaust manifold and plumbing to get a second turbo in as a set of compounds. it will be a while till thats done though as the manifold is going to be slow to make. im using some inconel 625 sheet i got to roll tubes, seam weld them and then pie cut and weld to get curves. once thats done i gotta finally decide what the LP turbo is going to be as there are at least 3 im considering right now. theres a lot more ideas i have been toying with in my head to test on this car but im limited in time and money right now so well see if i ever get around to them. all that being said the car is a blast to drive now it will slam you into the seat from a stop and i have broken the rear lose at 50 mph hitting the kick-down switch.