full load increase electronic governor
full load increase electronic governor
(10-29-2009, 01:19 PM)E300TSC One thing we (drive by wire owners) can do is mount a micro switch on the TPS that will insert the resistor into the RPS circuit at a given throttle position.
Personally, I want to go with a more linear approach and put a variable resistor in line so the effect comes on smoothly.
(10-29-2009, 01:19 PM)E300TSC Update:
Confirmed this morning relating to the rack position sensor:
Pin 1 - Red
Pin 6 - Green
Pin 7 - Black
(10-29-2009, 01:19 PM)E300TSC One thing we (drive by wire owners) can do is mount a micro switch on the TPS that will insert the resistor into the RPS circuit at a given throttle position.
Personally, I want to go with a more linear approach and put a variable resistor in line so the effect comes on smoothly.
(10-29-2009, 01:19 PM)E300TSC Update:
Confirmed this morning relating to the rack position sensor:
Pin 1 - Red
Pin 6 - Green
Pin 7 - Black