full load increase electronic governor
full load increase electronic governor
This is a great thread! I just got done installing and testing a resistor in my 99 E300TD. Here is what I found.
When using a potentiometer, the lowest value I could go to was 3.1 ohms before the engine would start to rev up. I could actually rev the engine up with the pot at values below 3.1 ohms. It does make the car smoke alot more now too and does feel faster.
I then removed the potentiometer and installed a 3.9K resistor.
Keep in mind my car was already chipped before I installed the resistor so this does seem to increase the power above the 215hp level of the chip.