full load increase electronic governor
full load increase electronic governor
Thank you Matt, that is a brilliant schema.
I'll see if I can do any tinkering this weekend with this.
I guess those wire pin can be find where the ECU is? It'll be easier to pull them and weld there.
is the switch a necessity as you need to turn it on and off or just a prevention in case you like to turn it off?
Again a big tank you
I took the resistor from the boost sensor ( you see, I'm listerning ) and now I am at 15PSI, no difference on the car reaction. I did 0 to 60 in 10 seconds, this on 100% veg, that's not too bad, I still miss the oomph that it use to have before.
Perhaps the reisitor will do something
Olivier