STD Other Non MBZ Diesel MTDI Bosch VE won't shut off

MTDI Bosch VE won't shut off

MTDI Bosch VE won't shut off

 
  • 0 Vote(s) - 0 Average
 
Fishman
GTA2056V

92
07-08-2016, 12:56 PM #1
Hi,

I've build a mechanical Bosch VE pump for a 2.5 R5 TDI. Basepump is a Rover Mechanical TDI pump. Engine runs great, but when i want to shut her off, she keeps running irregular. Pump is tested, nozzels are tested en stopselenoid is tested. All ok. Anybody a idea what's wrong?
This post was last modified: 07-08-2016, 12:57 PM by Fishman.
Fishman
07-08-2016, 12:56 PM #1

Hi,

I've build a mechanical Bosch VE pump for a 2.5 R5 TDI. Basepump is a Rover Mechanical TDI pump. Engine runs great, but when i want to shut her off, she keeps running irregular. Pump is tested, nozzels are tested en stopselenoid is tested. All ok. Anybody a idea what's wrong?

MFSuper90
Budget Builder

1,533
07-08-2016, 05:41 PM #2
the pump should shut off when 12v is taken away from the solenoid. Do you have voltage at the solenoid when it's shutoff?

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
07-08-2016, 05:41 PM #2

the pump should shut off when 12v is taken away from the solenoid. Do you have voltage at the solenoid when it's shutoff?


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Fishman
GTA2056V

92
07-09-2016, 02:13 AM #3
No voltage at de cut off valve. I can disconnect the batterie an she keeps running.
Fishman
07-09-2016, 02:13 AM #3

No voltage at de cut off valve. I can disconnect the batterie an she keeps running.

MFSuper90
Budget Builder

1,533
07-10-2016, 07:36 AM #4
Hmmm, that is interesting. Are all the parts and pieces in the shutoff solenoid?

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
07-10-2016, 07:36 AM #4

Hmmm, that is interesting. Are all the parts and pieces in the shutoff solenoid?


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Fishman
GTA2056V

92
07-10-2016, 08:06 AM #5
Yess. Even fitted an other one.
Fishman
07-10-2016, 08:06 AM #5

Yess. Even fitted an other one.

MFSuper90
Budget Builder

1,533
07-10-2016, 04:37 PM #6
Any picture of the pump? There are several different styles of VE pumps,
Some I have seen have mechanical stops

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
07-10-2016, 04:37 PM #6

Any picture of the pump? There are several different styles of VE pumps,
Some I have seen have mechanical stops


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

Petar
7.5mm M pump

459
07-10-2016, 05:48 PM #7
[Image: clip_image002_thumb.jpg?imgmax=800]
From what i can see your problem is either the stop solenoid, or there is another hole that the fuel goes through, or the seat of the valve leaks. Maybe you have the push type solenoid ? Have you tried applying power to shut it down ?
Petar
07-10-2016, 05:48 PM #7

[Image: clip_image002_thumb.jpg?imgmax=800]
From what i can see your problem is either the stop solenoid, or there is another hole that the fuel goes through, or the seat of the valve leaks. Maybe you have the push type solenoid ? Have you tried applying power to shut it down ?

Evgeniy1987
GT2256V

139
07-12-2016, 07:54 AM #8
The pump makes too high pressure. The distance between the pumping element piston and the "end screw" is too little. increase the distance by installing a thinner shim between the camplate and piston..

That is a very common cause of such problem.
Evgeniy1987
07-12-2016, 07:54 AM #8

The pump makes too high pressure. The distance between the pumping element piston and the "end screw" is too little. increase the distance by installing a thinner shim between the camplate and piston..

That is a very common cause of such problem.

Fishman
GTA2056V

92
07-16-2016, 03:45 AM #9
(07-12-2016, 07:54 AM)Evgeniy1987 The pump makes too high pressure. The distance between the pumping element piston and the "end screw" is too little. increase the distance by installing a thinner shim between the camplate and piston..

That is a very common cause of such problem.

I had the pressure tested and it was way to low. They shimmed it to a higher pressure. Before i didn't get any black diesel smoke. Now i do. I can shut it off with the mechanical lever.

https://youtu.be/LFRPp4YUtiM

[Image: 20160302_151332_zpsyg2nzkyc.jpg]
This post was last modified: 07-16-2016, 03:53 AM by Fishman.
Fishman
07-16-2016, 03:45 AM #9

(07-12-2016, 07:54 AM)Evgeniy1987 The pump makes too high pressure. The distance between the pumping element piston and the "end screw" is too little. increase the distance by installing a thinner shim between the camplate and piston..

That is a very common cause of such problem.

I had the pressure tested and it was way to low. They shimmed it to a higher pressure. Before i didn't get any black diesel smoke. Now i do. I can shut it off with the mechanical lever.

https://youtu.be/LFRPp4YUtiM

[Image: 20160302_151332_zpsyg2nzkyc.jpg]

starynovy
Holset

338
07-18-2016, 05:45 AM #10
Wow, not common to see mechanical pump with injection advance selenoid.

-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
starynovy
07-18-2016, 05:45 AM #10

Wow, not common to see mechanical pump with injection advance selenoid.


-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)