1986 300E 5 speed trans any good?
1986 300E 5 speed trans any good?
What car and what diff gear are you using?
raysorenson
06-28-2016, 12:39 PM #2It's a 717.430. Google it and read what the internets say, FWIW. I'd rather not comment because I don't have any direct experience.
What car and what diff gear are you using?
Duncansport
06-29-2016, 09:24 AM #3I have one in my 124 and 605. Shifts great after rebuilding and using the updated synchro's. Down side is with my stock 2.65 diff the gearing is WAY to tall. Engine RPM is at 1750 @ 75mph. First gear is tough to take off in due to clutch and gearing, a 3.27 diff would make it much better i think.
(06-29-2016, 10:40 AM)raysorenson I have a 16v diff in pieces if interested.I am indeed
Duncansport
06-29-2016, 08:42 PM #5(06-29-2016, 10:40 AM)raysorenson I have a 16v diff in pieces if interested.I am indeed
i ran on stock clutch, a 717.430 supposed to be lowmileage, a om602 with stock turbo 7.5mm dieselmeken, about 200hp.
no clutch slippege, and gearbox said goodbye after 20000km. and thats the second 717.430.
the one that i bought the car with broke 100km after i bought it, this one now.
---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
swampmonkey
07-04-2016, 06:09 PM #6its a lot weaker than your 717.404.
i ran on stock clutch, a 717.430 supposed to be lowmileage, a om602 with stock turbo 7.5mm dieselmeken, about 200hp.
no clutch slippege, and gearbox said goodbye after 20000km. and thats the second 717.430.
the one that i bought the car with broke 100km after i bought it, this one now.
---------------------------------
daily driver
w115 240d 72hp 3.07 rearend
w123 om602 turbo 200whp 7.5mm pump fivespeed 3.07 rearend
+ a few more.
mbturbo.com
2 Guest(s)
2 Guest(s)