STD Tuning Drivetrain Highest stall stock 722.6 converter

Highest stall stock 722.6 converter

Highest stall stock 722.6 converter

 
  • 0 Vote(s) - 0 Average
 
TurboTim
Holset

457
05-15-2016, 08:15 AM #1
With my laggy turbo my motor only stalls at around 2.2k. It will go slightly higher with letting it sit but I know my car would drive way nicer if it could flash to 3k right away. What is the most loose stock 6 cyl converter?

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
05-15-2016, 08:15 AM #1

With my laggy turbo my motor only stalls at around 2.2k. It will go slightly higher with letting it sit but I know my car would drive way nicer if it could flash to 3k right away. What is the most loose stock 6 cyl converter?


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

Evgeniy1987
GT2256V

139
05-15-2016, 10:43 AM #2
http://turbobandit.com/Mercedes-Transmission/converter

Did you have a look at this one?
Evgeniy1987
05-15-2016, 10:43 AM #2

http://turbobandit.com/Mercedes-Transmission/converter

Did you have a look at this one?

TurboTim
Holset

457
05-15-2016, 11:10 AM #3
Yeah that's for ballers though.

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
05-15-2016, 11:10 AM #3

Yeah that's for ballers though.


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

whipplem104
Holset

559
05-15-2016, 01:16 PM #4
There are not really any high stall converters. Just have your local converter shop open it up for you. It should not really cost more than around 5-700.
whipplem104
05-15-2016, 01:16 PM #4

There are not really any high stall converters. Just have your local converter shop open it up for you. It should not really cost more than around 5-700.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)