W124 dailydriver upgrade
W124 dailydriver upgrade
Been a while I have updated anything, but been assembling the engine back to one piece.
whipplem104 has been talking here about damper problems and I did look this ones too. There was already marks that damper has been moving around and keyway has come little bit loose. Tapped couple of m6 threads to the damper and crankshaft and assembled it with heavy duty bearing locking fluid. I know this isn't the best way of doing this, but this engine is already seen it's best days so if it goes bananas, I just make new one
Picture of the holes drilled and tapped m6
Putting the head back on, used Mopar head gasket glue on all survaces, between each layer of head gasket too. Block is honed and head gasket survace also grinded at the same time by the maching shop.
Almost done