S/W124 722.6 gearbox mount. (Crossmember)
S/W124 722.6 gearbox mount. (Crossmember)
I reacently fitted my 722.6 auto from a 320cdi.
Is there a bolt on transmission mount for the 722.6 in the w124?
/Markus
------------------------------------------------
Cars currently owned:
1993 Mercedes Benz 300TDT W124
1992 Mercedes Benz 500E W124
whipplem104
02-11-2016, 09:40 AM #2Not that I have found. I just drill the crossmember out for the transmission mount.
Is the a "bolt on" transmission crossmember for the 722.6 trans that Will bolt up to the W/S124 chassi?
☺️
------------------------------------------------
Cars currently owned:
1993 Mercedes Benz 300TDT W124
1992 Mercedes Benz 500E W124
I used the wrong Word here, i meant:
Is the a "bolt on" transmission crossmember for the 722.6 trans that Will bolt up to the W/S124 chassi?
☺️
------------------------------------------------
Cars currently owned:
1993 Mercedes Benz 300TDT W124
1992 Mercedes Benz 500E W124
whipplem104
02-11-2016, 11:50 AM #4Like I said not that I have found. I keep looking though. No body makes an aftermarket one. I keep looking at different Mercedes.
whipplem104
02-11-2016, 08:33 PM #6It really is quite easy to just drill the holes in the 124 crossmember for the 722.6 mount.
(02-11-2016, 08:33 PM)whipplem104 It really is quite easy to just drill the holes in the 124 crossmember for the 722.6 mount.
it's not comlete tip -a rear part of gearbox would be too low. because of it you need put a spasers between rear box support and crossmember
thikness is about 10-12mm
whipplem104
03-10-2016, 01:02 PM #8Well I have never measured the drive line angle but I have done several of these and have no real vibrations to report. I also have measured the basic position to center and it seems fairly close. I also have probably around 10-20 customers with this setup in w124 chassis and have never had anyone complain.
1 Guest(s)
1 Guest(s)