Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
Update...
Had a wee prang on a motorbike/scooter thing I bought which put me on crutches for a while. Rain also didn't help with the car being on a poorly draining lawn with a 2" puddle under the car...
So...needed to install a new slave cylinder after I stuffed up my rod lengths for the piston>release fork, ended up blowing the piston almost out the end of the cylinder...
Got the cylinder in yesterday, tried bleeding it today by using a big syringe I use for lawnmower oil changes but no luck, I can suck the fluid out the bottom forever and a day, but whenever I stop getting bubbles the pedal is never "primed" as if its not even attached to anything. Going to try pressure bleed it tomorrow with an old garden sprayer. I filled the reservoir up all the way so might flush the brakes out while I'm there.