Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
10-09-2017, 02:16 AM
#40
Anyway I have a custom flywheel made to fit the SPEC BMW 535i pressure plate and 6 puck sinter clutch. Just bolted it on the engine today after getting it all match balanced last week to the old flywheel.
Just now have to check the clutch fork position (stock was 44mm from the slave cylinder mounting surface FWIW) as the flywheel maker had to change things a bit to fit the PP. Tomorrow's job if the rain stays away...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Been making some progress lately but can't show yas - anyone else having issues uploading/attaching pics on here?
Anyway I have a custom flywheel made to fit the SPEC BMW 535i pressure plate and 6 puck sinter clutch. Just bolted it on the engine today after getting it all match balanced last week to the old flywheel.
Just now have to check the clutch fork position (stock was 44mm from the slave cylinder mounting surface FWIW) as the flywheel maker had to change things a bit to fit the PP. Tomorrow's job if the rain stays away...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
Baby Holset Turbo Conversion build thread - by NZScott - 11-07-2015, 01:55 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-07-2015, 03:13 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-06-2016, 06:37 PM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 01-06-2016, 10:14 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-07-2016, 02:17 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-08-2016, 01:02 AM
RE: Baby Holset Turbo Conversion build thread - by [486] - 02-09-2016, 11:41 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-11-2016, 01:56 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 04-23-2016, 07:19 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:55 AM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-01-2016, 10:07 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:58 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-04-2016, 07:18 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 12:52 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-05-2016, 07:08 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 09:01 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-10-2016, 08:03 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-18-2016, 11:51 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-11-2016, 03:03 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-16-2016, 04:17 PM
RE: Baby Holset Turbo Conversion build thread - by Keino - 08-18-2016, 02:02 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-18-2016, 05:21 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-11-2016, 07:48 PM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 03:49 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-12-2016, 04:21 AM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 04:41 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-27-2016, 10:40 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-29-2016, 07:58 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 12:07 AM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 02:28 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 04:26 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 05:23 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 10:52 PM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-10-2017, 10:12 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-11-2017, 12:15 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-11-2017, 09:47 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-12-2017, 02:24 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-06-2017, 12:57 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-28-2017, 12:53 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-09-2017, 02:16 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 10-09-2017, 11:00 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-10-2017, 03:51 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-12-2017, 04:28 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2017, 02:14 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-17-2018, 01:49 AM
RE: Baby Holset Turbo Conversion build thread - by Mallinman - 01-17-2018, 02:55 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 01:34 AM
RE: Baby Holset Turbo Conversion build thread - by R-3350 - 07-07-2018, 08:19 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 03:25 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-12-2018, 07:34 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-22-2018, 04:42 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2018, 10:02 PM
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)