Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
08-18-2016, 11:51 AM
#20
(08-10-2016, 08:03 PM)NZScott Got things mostly together, a lot just temporary at the moment. Haven't got my boost, EMP or EGT gauges installed yet
Took it for a wee spin around the block....wow!
Accelerator is an on/off switch which was a given since this pump puts out 4x the old one, what makes it worse is my accelerator cable is actually a handbrake cable with high friction (broke my original cable). I'm going to look at the linkage and try adjust the leverage. Car is bloody quick even with my external throttle stop wound in as far as it can. Engine slips the clutch like mad and blew off the hose on top of the intake twiceAll good fun though...
Awesome!
Maybe Google: 'progressive throttle linkage' for ideas. Probably rob one from an OEM throttle body in the junk yardd
This post was last modified: 08-18-2016, 11:52 AM by Hario'.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
(08-10-2016, 08:03 PM)NZScott Got things mostly together, a lot just temporary at the moment. Haven't got my boost, EMP or EGT gauges installed yet
Took it for a wee spin around the block....wow!
Accelerator is an on/off switch which was a given since this pump puts out 4x the old one, what makes it worse is my accelerator cable is actually a handbrake cable with high friction (broke my original cable). I'm going to look at the linkage and try adjust the leverage. Car is bloody quick even with my external throttle stop wound in as far as it can. Engine slips the clutch like mad and blew off the hose on top of the intake twice
Awesome!
Maybe Google: 'progressive throttle linkage' for ideas. Probably rob one from an OEM throttle body in the junk yardd
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Messages In This Thread
Baby Holset Turbo Conversion build thread - by NZScott - 11-07-2015, 01:55 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-07-2015, 03:13 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-06-2016, 06:37 PM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 01-06-2016, 10:14 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-07-2016, 02:17 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-08-2016, 01:02 AM
RE: Baby Holset Turbo Conversion build thread - by [486] - 02-09-2016, 11:41 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-11-2016, 01:56 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 04-23-2016, 07:19 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:55 AM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-01-2016, 10:07 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:58 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-04-2016, 07:18 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 12:52 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-05-2016, 07:08 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 09:01 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-10-2016, 08:03 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-18-2016, 11:51 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-11-2016, 03:03 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-16-2016, 04:17 PM
RE: Baby Holset Turbo Conversion build thread - by Keino - 08-18-2016, 02:02 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-18-2016, 05:21 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-11-2016, 07:48 PM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 03:49 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-12-2016, 04:21 AM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 04:41 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-27-2016, 10:40 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-29-2016, 07:58 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 12:07 AM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 02:28 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 04:26 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 05:23 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 10:52 PM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-10-2017, 10:12 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-11-2017, 12:15 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-11-2017, 09:47 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-12-2017, 02:24 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-06-2017, 12:57 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-28-2017, 12:53 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-09-2017, 02:16 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 10-09-2017, 11:00 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-10-2017, 03:51 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-12-2017, 04:28 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2017, 02:14 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-17-2018, 01:49 AM
RE: Baby Holset Turbo Conversion build thread - by Mallinman - 01-17-2018, 02:55 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 01:34 AM
RE: Baby Holset Turbo Conversion build thread - by R-3350 - 07-07-2018, 08:19 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 03:25 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-12-2018, 07:34 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-22-2018, 04:42 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2018, 10:02 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)