Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
08-10-2016, 08:03 PM
#17
Took it for a wee spin around the block....wow!
Accelerator is an on/off switch which was a given since this pump puts out 4x the old one, what makes it worse is my accelerator cable is actually a handbrake cable with high friction (broke my original cable). I'm going to look at the linkage and try adjust the leverage. Car is bloody quick even with my external throttle stop wound in as far as it can. Engine slips the clutch like mad and blew off the hose on top of the intake twice
All good fun though...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Got things mostly together, a lot just temporary at the moment. Haven't got my boost, EMP or EGT gauges installed yet
Took it for a wee spin around the block....wow!
Accelerator is an on/off switch which was a given since this pump puts out 4x the old one, what makes it worse is my accelerator cable is actually a handbrake cable with high friction (broke my original cable). I'm going to look at the linkage and try adjust the leverage. Car is bloody quick even with my external throttle stop wound in as far as it can. Engine slips the clutch like mad and blew off the hose on top of the intake twice All good fun though...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
Baby Holset Turbo Conversion build thread - by NZScott - 11-07-2015, 01:55 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-07-2015, 03:13 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-06-2016, 06:37 PM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 01-06-2016, 10:14 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-07-2016, 02:17 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-08-2016, 01:02 AM
RE: Baby Holset Turbo Conversion build thread - by [486] - 02-09-2016, 11:41 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-11-2016, 01:56 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 04-23-2016, 07:19 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:55 AM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-01-2016, 10:07 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:58 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-04-2016, 07:18 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 12:52 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-05-2016, 07:08 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 09:01 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-10-2016, 08:03 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-18-2016, 11:51 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-11-2016, 03:03 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-16-2016, 04:17 PM
RE: Baby Holset Turbo Conversion build thread - by Keino - 08-18-2016, 02:02 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-18-2016, 05:21 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-11-2016, 07:48 PM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 03:49 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-12-2016, 04:21 AM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 04:41 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-27-2016, 10:40 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-29-2016, 07:58 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 12:07 AM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 02:28 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 04:26 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 05:23 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 10:52 PM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-10-2017, 10:12 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-11-2017, 12:15 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-11-2017, 09:47 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-12-2017, 02:24 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-06-2017, 12:57 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-28-2017, 12:53 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-09-2017, 02:16 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 10-09-2017, 11:00 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-10-2017, 03:51 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-12-2017, 04:28 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2017, 02:14 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-17-2018, 01:49 AM
RE: Baby Holset Turbo Conversion build thread - by Mallinman - 01-17-2018, 02:55 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 01:34 AM
RE: Baby Holset Turbo Conversion build thread - by R-3350 - 07-07-2018, 08:19 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 03:25 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-12-2018, 07:34 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-22-2018, 04:42 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2018, 10:02 PM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)