Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
08-01-2016, 10:07 AM
#11
(08-01-2016, 03:55 AM)NZScott Progress report?
Got the engine swapped in but still hasn't run in the car yet.
Car's been getting a full 3" exhaust installed which took a month...anyway I got the car back today. Fitted the oil cooler which had a thread repaired. Turbo isn't quite fitting and I can't get the bottom rear nut on the exhaust manifold on...but other than that making some progress.
Going to leave the intercooler off until after I get it road legal again. Need the room to try fit my landcruiser air filter housing in. She's also got some rust that needs sorting yet.
My current radiator has the plastic tanks (ugh) and had a run in with the fan at one stage which meant some tubes had to be soldered up. Also it's not the wider "turbo" radiator... not wanting to risk cooking the girl, looking at fitting a universal aluminium radiator in since nobody has the Spectra Cu672 in stock.
Any chance of getting the thread renamed? HX30W isn't really a baby now..
Winnmut will rename for you.
Thought about a rad from a W201/W210/W203 diesel etc? Whatever's easily available up your end? They will have the same pipe diameters & outlet positions etc..
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
(08-01-2016, 03:55 AM)NZScott Progress report?
Got the engine swapped in but still hasn't run in the car yet.
Car's been getting a full 3" exhaust installed which took a month...anyway I got the car back today. Fitted the oil cooler which had a thread repaired. Turbo isn't quite fitting and I can't get the bottom rear nut on the exhaust manifold on...but other than that making some progress.
Going to leave the intercooler off until after I get it road legal again. Need the room to try fit my landcruiser air filter housing in. She's also got some rust that needs sorting yet.
My current radiator has the plastic tanks (ugh) and had a run in with the fan at one stage which meant some tubes had to be soldered up. Also it's not the wider "turbo" radiator... not wanting to risk cooking the girl, looking at fitting a universal aluminium radiator in since nobody has the Spectra Cu672 in stock.
Any chance of getting the thread renamed? HX30W isn't really a baby now..
Winnmut will rename for you.
Thought about a rad from a W201/W210/W203 diesel etc? Whatever's easily available up your end? They will have the same pipe diameters & outlet positions etc..
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Messages In This Thread
Baby Holset Turbo Conversion build thread - by NZScott - 11-07-2015, 01:55 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-07-2015, 03:13 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-06-2016, 06:37 PM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 01-06-2016, 10:14 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-07-2016, 02:17 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-08-2016, 01:02 AM
RE: Baby Holset Turbo Conversion build thread - by [486] - 02-09-2016, 11:41 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-11-2016, 01:56 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 04-23-2016, 07:19 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:55 AM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-01-2016, 10:07 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:58 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-04-2016, 07:18 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 12:52 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-05-2016, 07:08 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 09:01 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-10-2016, 08:03 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-18-2016, 11:51 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-11-2016, 03:03 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-16-2016, 04:17 PM
RE: Baby Holset Turbo Conversion build thread - by Keino - 08-18-2016, 02:02 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-18-2016, 05:21 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-11-2016, 07:48 PM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 03:49 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-12-2016, 04:21 AM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 04:41 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-27-2016, 10:40 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-29-2016, 07:58 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 12:07 AM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 02:28 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 04:26 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 05:23 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 10:52 PM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-10-2017, 10:12 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-11-2017, 12:15 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-11-2017, 09:47 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-12-2017, 02:24 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-06-2017, 12:57 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-28-2017, 12:53 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-09-2017, 02:16 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 10-09-2017, 11:00 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-10-2017, 03:51 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-12-2017, 04:28 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2017, 02:14 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-17-2018, 01:49 AM
RE: Baby Holset Turbo Conversion build thread - by Mallinman - 01-17-2018, 02:55 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 01:34 AM
RE: Baby Holset Turbo Conversion build thread - by R-3350 - 07-07-2018, 08:19 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 03:25 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-12-2018, 07:34 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-22-2018, 04:42 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2018, 10:02 PM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)