Baby Holset Turbo Conversion build thread
Baby Holset Turbo Conversion build thread
02-08-2016, 01:02 AM
#6
Got the T25-T3 adaptor machined down, also got the workshop to do something else...
Got my rusty old OM616 flywheel machined down to 7 kg. Fitted it today but of course have no idea if it was balanced right but we'll see.
Only thing holding me up is that our garage is so full of crap I can't get anything in or out. Still looking for a 1/8 NPT tap for the turbo oil feed from the oil filter housing lid, and the drain in the sump which I might be able to put into the lower steel sump. Took the front wheels off as I have a warped rotor but I see I have to take the bearings etc off, bugger...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Still making progress, albeit glacial...getting used to a Japanese DD is a bad thing
Got the T25-T3 adaptor machined down, also got the workshop to do something else...
Got my rusty old OM616 flywheel machined down to 7 kg. Fitted it today but of course have no idea if it was balanced right but we'll see.
Only thing holding me up is that our garage is so full of crap I can't get anything in or out. Still looking for a 1/8 NPT tap for the turbo oil feed from the oil filter housing lid, and the drain in the sump which I might be able to put into the lower steel sump. Took the front wheels off as I have a warped rotor but I see I have to take the bearings etc off, bugger...
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Messages In This Thread
Baby Holset Turbo Conversion build thread - by NZScott - 11-07-2015, 01:55 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-07-2015, 03:13 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-06-2016, 06:37 PM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 01-06-2016, 10:14 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-07-2016, 02:17 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-08-2016, 01:02 AM
RE: Baby Holset Turbo Conversion build thread - by [486] - 02-09-2016, 11:41 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 02-11-2016, 01:56 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 04-23-2016, 07:19 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:55 AM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-01-2016, 10:07 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-01-2016, 03:58 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-04-2016, 07:18 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 12:52 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-05-2016, 07:08 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-05-2016, 09:01 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-10-2016, 08:03 PM
RE: Baby Holset Turbo Conversion build thread - by Hario' - 08-18-2016, 11:51 AM
RE: Baby Holset Turbo Conversion build thread - by MFSuper90 - 08-11-2016, 03:03 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-16-2016, 04:17 PM
RE: Baby Holset Turbo Conversion build thread - by Keino - 08-18-2016, 02:02 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 08-18-2016, 05:21 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-11-2016, 07:48 PM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 03:49 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-12-2016, 04:21 AM
RE: Baby Holset Turbo Conversion build thread - by barrote - 10-12-2016, 04:41 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-27-2016, 10:40 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-29-2016, 07:58 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 12:07 AM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 02:28 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 04:26 PM
RE: Baby Holset Turbo Conversion build thread - by 300sd/5speed - 10-30-2016, 05:23 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-30-2016, 10:52 PM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-10-2017, 10:12 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-11-2017, 12:15 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 01-11-2017, 09:47 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-12-2017, 02:24 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-06-2017, 12:57 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 03-28-2017, 12:53 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-09-2017, 02:16 AM
RE: Baby Holset Turbo Conversion build thread - by Austincarnut - 10-09-2017, 11:00 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 10-10-2017, 03:51 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-12-2017, 04:28 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2017, 02:14 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 01-17-2018, 01:49 AM
RE: Baby Holset Turbo Conversion build thread - by Mallinman - 01-17-2018, 02:55 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 01:34 AM
RE: Baby Holset Turbo Conversion build thread - by R-3350 - 07-07-2018, 08:19 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-07-2018, 03:25 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 07-12-2018, 07:34 PM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-22-2018, 04:42 AM
RE: Baby Holset Turbo Conversion build thread - by NZScott - 12-23-2018, 10:02 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)