Hi ya'll. Got a free 79 300td....
Hi ya'll. Got a free 79 300td....
11-22-2015, 10:38 AM
#31
(11-03-2015, 03:14 PM)kestreltom(11-03-2015, 12:31 PM)bicyclewrench Yep it's the wagon. I'd love to have found a turbo on that thing. I assume it would be located somewhere in the vicinity of the intake and exhaust manifold. I certainly looked. There is also no badging on the car relating to "turbo".
OK, so no turbo. If what you have is the OM617 (the normally aspirated version), then that is a good thing too. The torque & hp are lower than the OM617a, but they are valued for their simplicity & reliability..
The OM617a is a completely different beast. Bolting a turbo onto an om617 will not an "a" make.
617-912 is the MB nomenclature for a non turbo 617. The turbo version is named 617-95(X). The (X) is due to several slightly different versions 951, 952, etc
Yes you can put a turbo on a 912 version, but that version has differences from the turbo versions which may limit the longevity after it's altered with forced induction.
This post was last modified: 11-22-2015, 10:39 AM by MTUPower.
2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's
(11-03-2015, 03:14 PM)kestreltom(11-03-2015, 12:31 PM)bicyclewrench Yep it's the wagon. I'd love to have found a turbo on that thing. I assume it would be located somewhere in the vicinity of the intake and exhaust manifold. I certainly looked. There is also no badging on the car relating to "turbo".
OK, so no turbo. If what you have is the OM617 (the normally aspirated version), then that is a good thing too. The torque & hp are lower than the OM617a, but they are valued for their simplicity & reliability..
The OM617a is a completely different beast. Bolting a turbo onto an om617 will not an "a" make.
617-912 is the MB nomenclature for a non turbo 617. The turbo version is named 617-95(X). The (X) is due to several slightly different versions 951, 952, etc
Yes you can put a turbo on a 912 version, but that version has differences from the turbo versions which may limit the longevity after it's altered with forced induction.
2005 CDI heavily modified 1984 300TD - Myna pump/TMIC/enlarged PC's/HX30Super/W126 II front brakes/Vogtland springs/EGT +Boost gauges/H4 Hella's
Messages In This Thread
Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-03-2015, 10:23 AM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-03-2015, 11:22 AM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-03-2015, 12:31 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-03-2015, 03:14 PM
RE: Hi ya'll. Got a free 79 300td.... - by MTUPower - 11-22-2015, 10:38 AM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-22-2015, 01:12 PM
RE: Hi ya'll. Got a free 79 300td.... - by CRD4x4 - 11-03-2015, 05:19 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-03-2015, 05:41 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-03-2015, 05:46 PM
RE: Hi ya'll. Got a free 79 300td.... - by CRD4x4 - 11-20-2015, 09:43 PM
RE: Hi ya'll. Got a free 79 300td.... - by mo1971fordcrew - 11-03-2015, 11:06 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-04-2015, 10:31 AM
RE: Hi ya'll. Got a free 79 300td.... - by mo1971fordcrew - 11-05-2015, 02:03 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-04-2015, 10:36 AM
RE: Hi ya'll. Got a free 79 300td.... - by Edian727 - 11-04-2015, 09:03 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-05-2015, 10:39 AM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-05-2015, 12:46 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-05-2015, 07:24 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-05-2015, 10:19 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-05-2015, 10:46 PM
RE: Hi ya'll. Got a free 79 300td.... - by MFSuper90 - 11-04-2015, 11:17 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-05-2015, 10:41 AM
RE: Hi ya'll. Got a free 79 300td.... - by MFSuper90 - 11-05-2015, 09:18 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-05-2015, 05:35 AM
RE: Hi ya'll. Got a free 79 300td.... - by barrote - 11-05-2015, 07:06 AM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-05-2015, 12:42 PM
RE: Hi ya'll. Got a free 79 300td.... - by NZScott - 11-06-2015, 12:51 AM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-06-2015, 07:55 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-07-2015, 01:48 AM
RE: Hi ya'll. Got a free 79 300td.... - by NZScott - 11-07-2015, 12:40 AM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-18-2015, 02:35 PM
RE: Hi ya'll. Got a free 79 300td.... - by kestreltom - 11-20-2015, 09:58 AM
RE: Hi ya'll. Got a free 79 300td.... - by MTUPower - 11-22-2015, 05:32 PM
RE: Hi ya'll. Got a free 79 300td.... - by Simpler=Better - 11-22-2015, 09:59 PM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-23-2015, 10:52 AM
RE: Hi ya'll. Got a free 79 300td.... - by bicyclewrench - 11-23-2015, 10:49 AM
RE: Hi ya'll. Got a free 79 300td.... - by Simpler=Better - 11-23-2015, 08:51 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)