(11-06-2015, 07:55 PM)bicyclewrench Yep it's an MW. I'm hoping it has as much flow as the one used on the .951?
AFAIK all the MWs had 5.5 mm elements and similar cams, so max flow is theoretically the same at approx 60cc. Fueling differences are nearly all due to governors being set up differently. By maxing out your torque module you can achieve a big boost in the low to mid-range power. OM616 put out a document that I used to adjust mine and it worked very well. Here is a link if you are interested.
OM616's MW governor adjustment guide , also an account of the adjustments that I made to my IP:
Kestreltom's MW adjustments